Product file — Tune®
You can't see the heat
it's costing you.
Harmonic distortion shows up as heat, noise, and a slightly higher bill every month. Tune corrects it at the source.
128°F
▲ 12° above rated
Exhibit C — the device
One small part.
Zero moving pieces.
mounts directly to the panel
no fans, no filters, nothing to replace
passive — draws 0W itself
- mounts directly to the panel
- passive — draws 0W itself
- no fans, no filters, nothing to replace
Spec — Unit 004
- Footprint
- 4.1" × 5.3"
- Mount location
- Inside breaker box
- Install time
- < 1 hour
- Power draw
- 0 W
drag — same panel, before and after Tune
What causes harmonics
Three kinds of load.
Every building has all three — and all three add up.
- Energy recovered
- 8–12%Energy recovered
- To install
- <1 hrTo install
- Power it draws
- 0 WPower it draws
Certification — three marks
Designed for operators, not electricians.
Simple. Install it, then watch your bill drop.
Safe. UL Labs tested. Passive, no ongoing cost.
Smart. Equipment runs cooler, lasts longer.
Card catalog — industries served
Built for high-energy operations.
- 01
Manufacturing
CNC, motors, automation
- 02
Food processing
Refrigeration, conveyors
- 03
Data centers
Servers, cooling, UPS
- 04
Healthcare
Medical equipment, HVAC
- 05
Retail
Refrigeration, lighting
- 06
Warehousing
Material handling, climate
- 07
Entertainment
Gaming machines, displays
- 08
Cultivation
Agriculture, greenhouse
Filed — common questions
The straight answers.
For the technically minded, Tune® is a passive inductive device that removes frequencies of electric current from non-linear loads that are not within the 60Hz fundamental waveform. For the rest of us, Tune® cleans the heat-generating noise in your electrical system created by your modern electronics.
A typical installation takes 15 to 30 minutes by a qualified electrician. Complete installation instructions are provided with each Tune® purchase. On request, technical assistance is available to support your successful installation via video or phone support.
None. It is an inductor connected in parallel to all of the neutral wire connections on the neutral bus bar. It uses zero electricity to do its job.
Our goal with Tune® is not to consume electricity, so there is no app or other interface. You can measure the current on the lead wires using a hand-held meter to confirm the current is flowing through Tune®. Measurement of the current flow through the device is recorded during installation.
For best results, a Tune® device should be installed in each breaker box.